Non alarm models will flash the parking lights only to confirm the transmitter code has been learned and stored. Both 15 second expiration, and ignition turning off while in the program mode will be indicated by a long chirp from the siren & or horn. Any time the ignition key is turned off while in the program mode, the system will immediately exit program mode.
If the 15 second time limit expires between steps, the unit will automatically exit the program mode. NOTE: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds of the previous step. NOTE: Because the system may be capable of sounding a siren, the vehicle horn, or both, where the siren chirp is referenced below, the siren may chirp, the horn may beep, or both devices may sound. Also, if you do not program a transmitter button into channel 2 which is the separate unlock/disarm channel, then whatever button is programmed into channel 1 will serve as both arm & disarm, and if used, Lock & Unlock. For channel 3, or optional function, you can program large and small buttons operated simultaneously. you have programmed the large button for arm, and the small button for disarm. Additionally, if both buttons are used and you require access to a 3rd channel or function, you would program a combination of buttons to control the 3rd function. Programming the Prestige APS02BT2 TransmitterĪny button or button combination can be programmed into any receiver channel.
0 kommentar(er)
